Shovel transport machinery such as bulldozers (which can be divided into tire bulldozers and crawler bulldozers), scrapers (also can be divided into crawler self-propelled scrapers, tire self-propelled scrapers and towed scrapers), loading Machines (can be divided into tire loaders and crawler loaders, graders (also can be divided into self-propelled graders and tow graders), transport vehicles (also can be divided into single-axis transport vehicles and dual-axle traction transport Cars, flatbeds and dump trucks, etc.

 

　Construction machinery CE certification mark requirements:

* The CE mark must be affixed to a prominent position on the product and should be legible and difficult to apply. Usually, the CE mark is affixed to the product or its parameter label; if the CE mark cannot be directly attached to the product, it can be affixed to the product packaging or the attached file, but the reason CE mark cannot be affixed to the product need to be indicated.

* CThe minimum height of the CE mark shall not be less than 5 mm, and if it is reduced or enlarged, it shall be proportionate.

* The Notified Body (NB) may participate in the conformity assessment activities of the design, production or entire (including design and production) phases depending on the conformity assessment procedures used.If NB is involved in the conformity assessment process at the production stage, the NB number should be placed after the CE mark. If more than one NB participates in the conformity assessment of the production phase, there will be several numbers after the CE mark.

 

* The CE mark and its NB number can also be affixed in other countries, ie if the product is a conformity assessment activity carried out in the country by a notified body in Europe, the CE mark can be affixed in this country.

 

Mainly applicable instructions：

[√]Mechanical instruction98/37/EC

【2006/42/EC】Effective from December 29, 2009, replacing 98/37/EC.

[√]Noise command 2000/14/EC，2005/88/EC（This product belongs to the product of the 12th clause of the Noise Directive and requires mandatory certification by the notified body.）

[√]Electromagnetic compatibility directive2004/108/EC

 

The main test item or report that needs to be completed for certification：

- The type approval certificate obtained by the engine according to 97/68/EC， that is the e-mark certificate.；

- Experimental report obtained from roll protection；

- Experimental report obtained from falling protection；

- Experimental report obtained from brake System；

- Noise test report at the operating position；

- Testing report of environmental noise of the machine；

- Provide complete machine EMC test report or electrical components used in the whole machine have obtained CE certification；

-Vibration test report。