Contact Us
Global Technical Service Co. Ltd
Contact: manager Chen
Tel:0769-8805 6552
Fax:0769-8805 6550
Phone:13360489203
QQ:417901602 
E-mail:info@globalgd.com / global_amy@126.COM
Address: Guancheng District, Dongguan City Wan Tai Road No. 5 XM Building, Room 507

Global Technical Service Co. Ltd
OFFICE Room 2103,21/F Ho King Commercial Centre, No. 2-16 Fa Yuen Street, Mong kok, Kowloon,HK
Tel: 00852-30697929
FAX:00852-6991 7688

Machinery Products

high place work equipment CE

The hanging basket and window cleaning machine are a new type of high operating equipment that can replace the traditional scaffolding, which can reduce the labor intensity, improve the work efficiency and can be used repeatedly. At present, the use of this kind of equipment has gradually become a trend. It has been widely recognized in the construction of exterior wall, curtain wall installation, insulation construction and maintenance and cleaning of exterior wall, and can also be used in large tanks, bridges and dams. Use of this product, you could not take a scaffolding. The construction cost is greatly reduced, the construction cost is only 28% of the traditional scaffold, and the work efficiency is greatly improved. The hanging basket is flexible in operation, easy to shift, convenient and practical, safe and reliable. Let us follow the CE certification body of engineering machinery to have a brief introduction.
 
Safety device
1,Pendulum arm safety lock;The safety wire rope can be locked when the tilting angle of the working platform is greater than 3-8 degrees or when the working wire rope is broken;
 
2,Manual skiing:It can drop steadily when power failure and power failure are lost, so as to ensure the safe arrival of the operator;
 
3,speed limit protection:When the descending speed exceeds the defined safe speed, the centrifugal deceleration device is started to slow down the speed.
 
4,Position limitation protection:Automatically cut off power and start the alarm when the basket device exceeds the manually set maximum limit;
 
5,Electrical overload protection:If the motor is abnormal or the circuit is abnormal and the motor is overloaded, disconnect the control circuit of the contactor to disconnect the main circuit.
 
6,Leakage Protection:The operator automatically closes the total circuit in case of accidental charging and leakage;
 
7,Emergency stop protection:The main control loop is cut off in the event of an unexpected abnormality (such as automatic rise or fall).
 
BMU and TST main test categories
 
Suspension platform type test
 
Type test of hoist and backup device
 suspension rig type test
 
The CE certification mainly applies to the instructions:
[√] Mechanical instruction 2006/42/EC
【2006/42/EC】Effective from December 29, 2009,replacing 98/37/EC.
[√] Electromagnetic compatibility directive 2004/108/EC
[√] Low voltage electrical command 2006/95/EC
 
 
6,leakage protection:The operator automatically closes the total circuit when the operator accidentally charges the electric body and leaks;
 
7,scram protection:The main control loop is cut off in the event of an unexpected abnormality (such as automatic rise or fall).
 
BMU and TST main test categories
 
Suspension platform type test
 
Type test of hoist and backup device
 
 suspension rig type test
 
The CE certification mainly applies to the instructions:
[√] Mechanical instruction 2006/42/EC
【2006/42/EC】Effective from December 29, 2009, replacing 98/37/EC.
[√] Electromagnetic compatibility directive 2004/108/EC
[√] Low voltage electrical command 2006/95/EC