Vertical packaging Mechanical CE certification The following considerations should be taken into account in the design of emergency shutdown:

& ndash; — Machines that do not reduce the risk because the emergency shutdown device cannot reduce the downtime or because it cannot take special measures to address the hazard;

& ndash; — Hand-held machines and manually controlled machines.

Emergency stop device must:

& ndash; — A controller that is clearly identifiable, clearly visible and quickly accessible;

& ndash; — Stop dangerous processes as soon as possible without causing additional danger;

& ndash; — Trigger or allow certain security protection mechanisms to be triggered if necessary.

Once effective operation is terminated after a stop order has been issued by the emergency stop control device, the order must be maintained by switching on the emergency stop device until the switch is clearly invalidated; The device must not be switched on without triggering a stop command; The device must be cut off only by a proper operation. Cutting off the emergency stop device does not restart the mechanical equipment, but only allows it to restart.