Evaluation criteria for machinery safety

< strong > engineering machinery CE certification < / strong > < / a > < / span > < / p >

As far as machinery directives are concerned, they can be roughly divided into the following type standards:

Example:

Part 1: Basic Terms, methods

Part 2: Technical Principles and Instructions

EN1050: Safety of Machinery — Risk assessment Principles

Example:

EN811: Safety of Machinery Safe distance to prevent lower limbs from reaching dangerous areas

Type B2 standard: for relevant safety features (e.g., two-hand controls, interlocking devices, pressure sensing devices, shields)

EN1088: Mechanical Safety — Interlocking device with/without shield locking

& ndash; General principles and regulations of design

EN953: Mechanical Safety — General specification for the design and construction of (fixed/movable) shields

Example:

EN201: Safety requirements for plastic/rubber injection molding machines

EN693: Safety requirements for hydraulic presses

EN860: Safety requirements for single-sided planers

EN869: Safety requirements for metal casting machines

EN982: Safety requirements for hydraulic systems

EN983: Safety requirements for air pressure systems

EN1493: Safety requirements for vehicle lifts

EN12415: Safety requirements for small lathes

EN12417: Safety requirements for integrated processing machines

EN12478: Safety requirements for large lathes

EN12717: Safety requirements for drilling machines