Procedure for applying CB Test Certificate to CCEE
(1) The applicant is the holder of the CB test certificate
1. The applicant can be an enterprise or an agent of an enterprise. In the latter case, documents must be submitted that authorize the applicant to make the application on behalf of the enterprise, and documents must be provided that the enterprise and the applicant bear the same responsibilities. These responsibilities refer to compliance with the rules and procedures of ECEE, the CCEE Charter, the certification rules and procedures, and the relevant national laws of China. Rules and regulations.
(2) The application may include one or more manufacturing plants in the applicant's country, and the products manufactured by these manufacturing plants will be controlled by the enterprise.
3. When the same products are manufactured in different countries, the applicant shall submit a separate application for each of the companies he represents in each country.
(4) If the applicant is in a non-member country of the CCB and makes an application on behalf of a non-member company, a surcharge must be paid for each application. The amount of the surcharge shall be determined by the Management Committee of IECEE. Unless otherwise agreed, the surcharge shall be collected by the CCEE processing the application and remitted to the IECEE Secretariat for deposit into the CB System account. Note: Wholly-owned enterprises are treated as foreign enterprises, and joint ventures are treated as domestic enterprises.
(2) Preparation before application
Where the applicant has the status of a legal person, when its product is ready to be sold to the world market, it is necessary to make it comply with the IEC standards adopted in the CB system in the product development and design stage (see Table 1), and also consider the differences between the national standards of CCB member states and the 1EC standards. Before submitting the application and sending samples, the applicant should confirm that its products comply with the IEC safety standards and the relevant differences in the national standards of the exporting country. - Appoint a person within the organisation to handle the application for, sample delivery, certification and post-certification matters from the cB test certificate and make him/her aware of the CB procedure.
(3) Application procedures
1. After completing the preparation of the application, the applicant shall contact the CCEE Secretariat to obtain the CB test certificate application form uniformly printed by CCB (see Figure 2). The letter states the applicant's name, address, national registration number (business license number), telephone number, fax number and product name, model, specification and trademark to be applied for.
2. After receiving the letter from the enterprise, CCEE Secretariat will send the application form, application procedures and fee requirements to the applicant.
3, the applicant received the CCEE secretariat to send the cB application and relevant information, according to the requirements of the application (typed in English), submitted to the CCEE secretariat in quadruplicate (one original, three copies) as a formal application, the applicant to keep a copy of the file, at the same time pay the required fees.
(4) If the applicant needs CCEE to prove that its products meet the differences between the national standards of China or other countries to be sold and the corresponding LC standards, then at the same time of submitting the application, it can request to issue an application that includes the test report of these differences, and the applicant should pay additional test fees, which, according to the relevant provisions of the fee standard.
5, ccEE secretariat received the applicant submitted (! After the sentinel and the fee, the applicant will be notified within two weeks, and the cB test task notice will be issued to the cB laboratory (according to the division of labor of the cB laboratory, or the laboratory that decides to undertake the task with the relevant institution is the test station).
6. After receiving the notice, the applicant shall send samples to the designated CB laboratory according to the requirements of the notice.
(4) Issuance of cB test certificate If the test results are qualified, ccEE will issue a cB test certificate to the applicant with the original CB test report attached. If the application contains a difference test, an additional test report will be attached.
How to fill out CB Test Certificate Application
1. Fill out the CB Test Certificate application form in English (typing).
2. The English name of the China Electrical Products Certification Committee should be filled in between the four small black dots on the upper right of the front page of the application.
3. Please fill in the application date clearly.
4. If the applicant and the manufacturer are the same unit, fill in the same name and address in the field respectively.
5, the whole machine has been used in the CB test certificate of the component column, if any, should fill in the component name and cB certificate number.
6, signature of the legal representative, the name of the legal representative with the typing of the Chinese pinyin, while the legal representative personally signed. Document 1 is an application form marked with Chinese translation. File 1: application form with Chinese translation: SCHEMEOFTHEICEEFORRECOGNITIONOFRESULTsOFT xingyuan INGTOSTANDARDSFODSAFE < / div >
TYOFELECTRICALEQUIPMENT (CB SCHEME), International Electrotechnical Commission Electrical Product Safety Certification Organization on electrical products according to the safety standards of the test results of the recognition system (CB system) Ourreference the applicant to its application number Date Appllcation Application date ForaCBTestCertificateCB test certificate application WeherebyapplyforaCBTestCertificateaccordingtoProcedurellandglveyouthefollowing < / div >
DeltailedinformationiNameandaddressofApplicant (I, e, Manufacturer) we according to the program and apply for CB test certificate and provide the following details: name and address of applicant (factory). Registered TelexNo ManufacturrtelelphOnenumber factory telephone ExtelnsiOn extension Teiegraphicaddress telegraph. Andanswerbackcede telex number and back BaoMa Nameofl) ersondealingwiththeapplicatiOn contact name NaMeandaddrelssoffactoryorfactories, Wheretheequipmentisproduced a factory that produces a product or a few name and address of the factory. TheCBTestCertificateistocoverthefollowingkindofequipment (suchascable rcwlrableornollrewirableplug, switch, washingtnachine, Etc) CB test certificate includes the following types of products (such as cable, or do not meet the plug, switch, washing machine, etc.) this column to fill in to apply for CB test certificate of product name trademark Descriptionofequipme Trademarkortrademarksoftheequipmelnt products nt: Ingeneal: typedesignation, cataloguenumber, etc. Forcordsandcables: cod0, designationsaccordingtotherdrvantstandardandnumberofcoresandcr <) ss a sectiOnddlateas. CtcForothcrequipment: theinformatiQnspecifiedintherelevantstan instructions: generally includes type, specification, etc., the corresponding standard for wire and cable including model, core number and cross-sectional area, etc. For other products, the information specified in the corresponding standard shall be included.
RefetenestoaIICBTestCettificateswhichhavebeenissuedforcOmpOnentsusedtheap
Pliance suchasfuses, switches, appliancecouples flexiblesupplycotdsandcables, plugs, etc. Incaseofretes - ing: Referenestopreviousapplication. The following components used in the whole machine, such as: fuses, switches, electrical couplers, power cords and flexible cables, plugs, etc., can be provided as a reference if the CB test certificate has been obtained, if the double side is required, refer to the previous application.
OtherinformationOfvaluetotheNCbs (suchascatalogues, pricelists, advertisingmateria1, Infotma - torypamphlets listsofcompOnentsorspareparts instructlonsfOrmaintelnanceandrepairpho - tographs, drawings, Adnislistedbelow circuitdiagrams) isenclosed (preferablylnquadruplicate) : Other valuable information provided to the NCB (catalogue, price list, promotional materials, brochures, components or spare parts list, maintenance guidelines, photos, drawings, circuit diagram) application form as attachment (in quadruplicate) WeareawareOfthefactthatwhenProcedurelisappliedthepr esentapplicationmaybecanc
ElledbytheFirstTestingStation, ifwehavenothandedinsufficienttestsamplestothetwoTestingStationsbefore6monthsa < / div >
FterreceiptoftherequestsoftheTestingStations, (note: according to the new rules and procedures, program has cancelled 1) wedeclarethatweWillfollowtheCBscheme. We declare our willingness to abide by the rules of the CB system.
