LED lamps and lanterns of exports to the eu must pass the < strong > < a href = "http://www.globalgd.com/services/" > CE certification < / a > < / strong >, this certification requirements of products need to LVD and EMC directive requirements. The test method is to use a special radiation instrument near the lamp when it is running normally, and the lamp is working normally, that is, EMC. Split the circuit, use high voltage through the circuit board, no explosion, that is, LVD.

EN 60598-1 is a general safety standard for lamps, and for specific categories of lamps, it is generally necessary to consider the safety characteristics of lamps in combination with the special requirements of the EN 60598-1 and EN 60598-2 series for specific categories of lamps.

EN 62031 is a safety specification for general lighting LED modules, which specifies the marking, terminals, protective grounding, protection against electric shock, insulation resistance after tidal state, electrical strength, fault state, structure, creepage distance and electrical clearance, heat resistance, fire and electrical marking resistance, corrosion resistance, etc.

EN 62471 is a standard for evaluating the photobiological safety of lamps and luminaire systems, where the light source includes LED, but does not include laser, which divides continuous radiation lamps into four categories according to the degree of optical radiation hazard: exempt class, Class 1 hazard (low hazard), class 2 hazard (medium hazard) and class 3 hazard (high hazard).

< strong > < a href = "http://www.globalgd.com/services/" > LED lamps and lanterns of CE certification < / a > < / strong > of EMC part is sad, weighing less than 500 grams, if you need to do to xing yuan electronic, You can do the test in our experiment for free first, if you can rectify it first.