CE certification of construction machinery Directive refers to the structure of the safety parts of the mechanical products sold on the market, which must be guaranteed to meet the requirements of the national regulations. In the operation and maintenance of mechanical products can not cause harm to the human body risk accidents.

Mechanical products will have some potential dangers in use. Therefore, mechanical products are divided into two types, ordinary CE certification, which belongs to a small number of dangerous machinery; Dangerous machinery CE certification, belongs to the machinery manufacturer in their own machinery is ordinary machinery or dangerous machinery must find out. But the general machinery is ordinary machinery.

1, the normal use of processing machinery, if the workpiece is easy to rebound and hurt the staff, the design and manufacture of processing machinery should be able to prevent the rebound of the workpiece, so as not to cause harm.

2, after the processing machinery stops running, the contact with the tool is still dangerous, and the processing machinery must be equipped with an automatic stop device to ensure that the tool is stopped in a very short time.

3, processing machinery with tools is not fully automated equipment, its design and manufacturing should prevent the occurrence of injury incidents; Or use a tool with a circular section and limit its cutting thickness to keep the harm to a minimum.

4, mainly from the motion components, including the motion shaft and transmission mechanism caused by extrusion, shearing or twisting and other dangers. Experts recommend the use of fixed or mobile shields to prevent people from approaching hazardous areas.