Mechanical CE certification, “ CE” A logo is a security certification mark that is seen as a passport for manufacturers to open and enter the European market. Next, let's talk about the Mechanical CE certification directive on machinery recommendations and requirements.

General mechanical hazards mainly come from the following four parts:

1, the normal use of processing machinery, if the workpiece is easy to rebound and hurt the staff, the design and manufacture of processing machinery should be able to prevent the rebound of the workpiece, so as not to cause harm;

2, if the processing machine stops running, the contact with the tool is still dangerous, the processing machine must be equipped with an automatic stop device to ensure that the tool is stopped in a very short period of time;

3, if the processing machinery with a tool is not fully automated equipment, its design and manufacturing should prevent the occurrence of injury incidents; Or use a tool with a circular section and limit its cutting thickness to keep the harm to a minimum.

4, mechanical hazards: mainly from the motion components, including the movement shaft and transmission mechanism caused by extrusion, shearing or twisting and other hazards. Fixed or mobile shields are recommended to prevent people from approaching hazardous areas.

Xingyuan Electronics specializes in global product testing and certification services, Provide a < strong > < a href = "http://www.globalgd.com/CErenzhengjieshao/" > CE certification < / a > < / strong >, mechanical CE certification, engineering machinery, CE certification, power supply CE certification, CE certification lithium-ion batteries, etc., Help Chinese products to enter the European market, welcome to consult.