Contact Us
Global Technical Service Co. Ltd
Contact: manager Chen
Tel:0769-8805 6552
Fax:0769-8805 6550
Phone:13360489203
QQ:417901602 
E-mail:info@globalgd.com / global_amy@126.COM
Address: Guancheng District, Dongguan City Wan Tai Road No. 5 XM Building, Room 507

Global Technical Service Co. Ltd
OFFICE Room 2103,21/F Ho King Commercial Centre, No. 2-16 Fa Yuen Street, Mong kok, Kowloon,HK
Tel: 00852-30697929
FAX:00852-6991 7688

ANATEL
Brazil ANATEL certification is aimed at the telecommunications productsAnatel certification is dividing into mandatory and voluntary certification. Its approval procedures are the same for both domestic and foreign products in Brazil. If the product is subject to compulsory certification, the product test results and reports must be consistent with the rules and regulations adopted by the ANATEL. Before the product is put into use, the certificate of authority issued by ANATEL shall be obtained.
 
The compulsory certification scope
There are three kind of telecommunication equipment need the mandatory certification
 
Type one
Terminal equipment connected to a fixed conversion telephone service (FSTS) network via an endpoint;
A device that connects a private telecommunications network to a FSTS network;
A device that which connects to FSTS network was for the purpose of providing a value-added service.
 
Type two
Any device that not covered by radio of type I, such as a low voltage device unauthorized equipment, and an antenna.
 
Type three
Type I or II is not covered by any equipment controlled by the rules and regulations of the ANATEL.
 
Forensic requirements
All products on the ANATEL list are required to be certified;
The certificate / authorization holder (importer, manufacturer) must be legally confirmed by the Brazil;
The certificate of type I is valid before the cancellation, and the other two types of certificates are valid for two years;
Manuals, installation instructions and warning signs must be in Portuguese. Other documents can be used in English;
The product must have an identification board containing the following information: ANATEL mark of certification number (bar code); manufacturer name; manufacturing year; model number; serial number; and distributor's registration number.